English
简体中文
Русский язык
Français
日本語
한국어
Português
Español
Website navigation
Position:
Leave A Message
E-mail:
Tell:
Whatapp:
Address:Room 1505, Building 9, No. 26 Dongqing Street, Zhengzhou High-tech Industrial Development Zone
Tel Number
180-3717-8440
Product introduction:
This equipment is a customized rotary furnace integrating high temperature zone and sublimation zone. The material can be carried by carrier gas to the high temperature zone for reaction after sublimation zone, and the furnace tube can be rotated 360° when the instrument is running, mainly for For the mixed firing of powders, it can be coated on the surface of a variety of powders.
This equipment is a customized rotary furnace integrating high temperature zone and sublimation zone. The material can be carried by carrier gas to the high temperature zone for reaction after sublimation zone, and the furnace tube can be rotated 360° when the instrument is running, mainly for For the mixed firing of powders, it can be coated on the surface of a variety of powders.
Application: mainly for the mixed firing of powders, and can be coated on the surface of a variety of powders.
Technical Parameters:
Technical Parameters:
| Product name | Customized rotary tube furnace (High temperature zone and sublimation zone are integrated) |
| Product number | KJ-R1500-S40-SZ |
| High temperature zone | |
| Furnace material | High quality alumina fiber |
| Heating element | High quality silicon molybdenum rod |
| Limit temperature | 1600°C |
| Operating temperature | ≤1500℃ |
| Heating rate | 0-10℃/min |
| Heating temperature zone | Single temperature zone temperature control, multi-stage "time-temperature curve" can be set |
| The length of the heating zone is about | 200mm, 300mm, 400mm optional |
| Temperature measuring element | B Type thermocouple |
| Furnace tube material | High purity corundum tube |
| Outer diameter of furnace tube | 30mm, 50mm, 60mm, 80mm optional |
| Low temperature zone (materials sublimate at 500 degrees) | |
| Furnace material | High quality alumina fiber |
| Heating element | High-quality resistance wire |
| Limit temperature | 600°C |
| Operating temperature | ≤500℃ |
| Heating rate | 0-10℃/min |
| Heating temperature zone | Single temperature zone temperature control, multi-stage "time-temperature curve" can be set |
| The length of the heating zone is about | 200mm, 300mm, 400mm optional |
| Temperature measuring element | N-type thermocouple |
| Vacuum pump (optional) | Rotary vane pump for pre-evacuation |
| More specifications can be customized according to requirements | |
